SP Enamel is a solvent based enamel paint developed specifically for interior and exterior metal/wood surfaces. It guarantees a hard adhesion and easy to clean finish with excellent resistance in high traffic areas.
Uses
Applicable for: interior and exterior surfaces such as metal and wood.
Surface Preparation
Scrape off loose and flaking paint.
Sand the surface with coarse sand/water paper according to the surface type to remove unwanted layers.
Apply 1 coat of SP Rust Primer for metal surfaces or SP Sealer to the area and 2 coats in highly corrosive areas near the sea.
For wood surfaces, apply 1 coat of SP Undercoat primer.
Advantages
Multi finish.
Excellent resistance.
Quick-drying.
Great coverage.
Drying Times
Full render - 45 minutes.
Recoat Dry Time - 4 hours.
Drying times refer to normal conditions: 25 C - 50% Humidity.
Under cooler, humid or still conditions, longer drying times may be necessary.
Application Guide
Brush, roller or airless spray.
Coverage
12 SQM per coat.
Surfaces
Wood and metal.
Colors
Wide range of shades through Supra's tinting system chromosynthesis.
Finish
Matt, semi-gloss and gloss.
Packaging
0.5-1-5 L.
Range
Solvent based.
Interior or Exterior
Interior and exterior.
Storage
The product must be stored and disposed-of in accordance with national regulations.
Product should be kept in cool dry place.
Protect from frost.
Containers should be kept in original seal for storage.
Handling
Handle with care.
Stir well before use.

Supra Paints Enamel