SP Epoxy is a two component solvent based epoxy coating suitable for interior surfaces with excellent adhesion properties. It is a self priming covering system that contains a polyamide based hardener: Bisphenol A, liquid epoxy resin cured which results in chemical protective wall and floor coating with high water resistance, excellent chemical and impact resistance on concrete and primed steel surfaces.
Uses
Applicable for: interior surfaces such as concrete, primed steel and coated surfaces in parkings, hotels, hospitals, public places, humid areas, industrials factories etc.
Surface Preparation
Surface must be clean, dry and free from all defective and poorly adhering material, dirt, grease and salts.
Priming and sanding may depend on surface conditions.
Advantages
Self-priming covering system.
Chemical and impact resistance.
Water-resistance on concrete and primed steel surfaces.
Drying Times
Full render - 90 minutes.
Recoat Dry Time - 12 to 24 hours.
Drying times refer to normal conditions: 25 C - 50% Humidity.
Under cooler, humid or still conditions, longer drying times may be necessary.
Application Guide
Brush, roller or airless spray.
Coverage
1 L / 5 SQM per coat.
Surfaces
Concrete and primed steel.
Colors
Available in clear, white, grey, black, and a wide range of shades through Supra's tinting system chromosynthesis.
Finish
Semi-gloss and gloss.
Packaging
1-5-20 L.
Range
Solvent based.
Interior or Exterior
Interior and exterior.
Storage
The product must be stored and disposed-ofin accordance with national regulations.
Product should be kept in cool dry place.
Protect from frost.
Containers should be kept in original seal for storage.
Handling
Handle with care.
Stir well before use.
Supra Paints Epoxy Solvent Based