SP Primer - Undercoat is a recommended solvent based primer for both prepared and primed interior and exterior surfaces where a high quality emulsion or solvent based paint is applied.
Uses
Applicable on: concrete and wood.
Surface Preparation
Surface must be clean, dry and free from all defective and poorly adhering material, dirt, grease andsalts.
Wipe the surface clean.
Sand the surface with coarse sand/water paper according to the surface type to remove rust/unwanted layers.
Defected surfaces must be filled with SP Leveling Putty.
Advantages
Excellent adhesion intercoat.
Good film build against corrosion.
Self-leveling system.
Drying Times
Full render - 2 to 6 hours.
Recoat Dry Time - 6 to 16 hours.
Drying times refer to normal conditions: 25 C - 50% Humidity.
Under cooler, humid or still conditions, longer drying times may be necessary.
Application Guide
Brush, roller or airless spray.
Coverage
1 L / 10 SQM per coat.
Surfaces
Concrete and wood.
Type
Wall.
Colors
White and cream.
Finish
Matt.
Packaging
1-5 L.
Range
Solvent based.
Interior or Exterior
Interior and exterior.
Storage
The product must be stored and disposed-ofin accordance with national regulations.
Product should be kept in cool dry place.
Protect from frost.
Containers should be kept in original seal for storage.
Handling
Handle with care.
Stir well before use.
Supra Paints Undercoat